Agrandir l'image 
Amplificateur 4 canaux, interface YDIF XMV4140
Référence: XMV4140
Equipé du nouveau format audio-numérique YDIF de Yamaha.
- 4x 140W sous 8Ω/4Ω
- 4x 125W en ligne 100V/70V
- 2x 280W en mode Double Power (8Ω/4Ω)
En savoir plus
| Model | XMV4280 | XMV4140 | XMV4280-D | XMV4140-D | ||
|---|---|---|---|---|---|---|
| Output Power | 1kHz, THD+N = 1% (20 ms Burst) | 4Ω | 280W x 4 | 140W x 4 | 280W x 4 | 140W x 4 |
| 8Ω | 280W x 4 | 140W x 4 | 280W x 4 | 140W x 4 | ||
| 4Ω/ Double Power Mode | 560W x 2 | 280W x 2 | 560W x 2 | 280W x 2 | ||
| 8Ω/ Double Power Mode | 560W x 2 | 280W x 2 | 560W x 2 | 280W x 2 | ||
| High impedance | 100V line | 250W x 4 / 40 Ω | 125W x 4 / 80 Ω | 250W x 4 / 40 Ω | 125W x 4 / 80 Ω | |
| 70V line | 250W x 4 / 20 Ω | 125W x 4 / 40 Ω | 250W x 4 / 20 Ω | 125W x 4 / 40 Ω | ||
| Voltage Gain | RL=8Ω | 31.7dB | 28.7dB | 31.7dB | 28.7dB | |
| RL=8Ω / Double Power Mode | 34.7dB | 31.7dB | 34.7dB | 31.7dB | ||
| 100V | 38.2dB | 38.2dB | 38.2dB | 38.2dB | ||
| 70V | 35.2dB | 35.2dB | 35.2dB | 35.2dB | ||
| Input Sensitivity | RL=8Ω | +4dBu | ||||
| S/N Ratio | A-weighted | ≥ 100dB | ||||
| Power Consumption | 1/8 power (4 Ω pink noise) | 250W | 150W | 250W | 150W | |
| Idle (4 Ω) | 37W | 37W | 37W | 37W | ||
| Standby | 18.5W | 18.5W | 18.5W | 18.5W | ||
| THD+N | 1kHz, half power | ≤ 0.2% | ||||
| Frequency Response | RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz | 0dB, ±1.0dB | ||||
| Crosstalk | 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt | ≤ -60dB | ||||
| Maximum Input Level | +24dBu | |||||
| Input Impedance | 20kΩ (balanced), 10k Ω (unbalanced) | |||||
| Connectors | Analog Input | Euroblock x 2 (6P, balanced) | ||||
| Digital Input / Output | RJ45 x 2 (YDIF IN / OUT) | RJ45 x 2 (Dante PRIMARY / SECONDARY) | ||||
| Speaker Output | Barrier strip x 4 pairs | |||||
| Network | RJ45 x 1 | Shared with Dante ports | ||||
| Remote, Fault Output | Euroblock (3P) x 1 | |||||
| AC IN | AC Inlet x 1 | |||||
| Protection circuit | Load Protection | POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting | ||||
| Amplifier Protection | Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically) | |||||
| Power Supply Protection | Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically) | |||||
| Cooling Fan | 3-Speed fan x 2, front-to-back airflow | |||||
| Power Requirements | 100V, 120V, 230V-240V; 50Hz/60Hz | |||||
| Dimensions | W | 480mm (18.9") | ||||
| H | 88mm (3.5") | |||||
| D | 422mm (16.6") | |||||
| Weight | 8.1kg (17.9lbs) | |||||
Avis
Aucun avis n'a été publié pour le moment.